Alcatel-Lucent 6850-48 参考指南

BGP Commands

page 44-194

OmniSwitch CLI Reference Guide

Configures the grace period for achieving a graceful BGP restart.

ip bgp graceful-restart restart-interval [seconds]

The hitless restart timeout interval, in seconds. The valid range is 
1–3600. 

OmniSwitch 6850, 6855,9000, 9000E

• The minimum hardware configuration for this command is a redundant CMM configuration. This 

command is not supported on a chassis-based switch with a single CMM or on a standalone switch.

• On a stackable switch, a graceful restart is supported only on active ports (i.e., interfaces) that are on 

the secondary or idle modules in a stack during a takeover. It is not supported on ports on a primary 
element in a stack.

• Note that graceful restart does not support IPv6 prefixes at this time.

-> ip bgp graceful-restart restart-interval 600

Release 6.1.3; command was introduced.

alaBgpGlobal

alaBgpGracefulRestart

alaBgpRestartInterval

90

Displays the current global settings for the local BGP speaker.