Alcatel-Lucent 6850-48 参考指南
PIM Commands
OmniSwitch CLI Reference Guide
September 2009
page 45-23
ip pim register checksum
Configures the application of the checksum function on sent and received register messages in the domain.
ip pim register checksum {header | full}
Syntax Definitions
header
Specifies that the checksum for registers is done only on the PIM
header.
header.
full
Specifies that the checksum is done over the entire PIM register
message.
message.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• The full option may be required for compatibility with older implementations of PIM-SM v2.
• This parameter setting must be consistent across the PIM domain.
• This command is supported only in the sparse mode.
Examples
-> ip pim register checksum header
-> ip pim register checksum full
Release History
Release 6.1.1; command was introduced.
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmOldRegisterMessageSupport
parameter
default
header | full
header
Displays the status of the various global parameters for the PIM
sparse mode.
sparse mode.