Alcatel-Lucent 6850-48 参考指南
PIM Commands
OmniSwitch CLI Reference Guide
September 2009
page 45-25
ip pim spt status
Enables or disables last hop Designated Router (DR) switching to the Shortest Path Tree (SPT). If
enabled, last hop DR switching to the SPT begins once the first data packet is received.
enabled, last hop DR switching to the SPT begins once the first data packet is received.
ip pim spt status {enable | disable}
Syntax Definitions
enable
Enables last hop DR switching to the SPT.
disable
Disables last hop DR switching to the SPT.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• This command is supported only in the sparse mode.
• As mentioned above, if SPT status is enabled, last hop DR switching to the SPT begins once the first
data packet is received.
• To view whether SPT status is currently enabled (default) or disabled, use the
command.
Examples
-> ip pim spt status enable
-> ip pim spt status disable
Release History
Release 6.1.1; command was introduced.
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmAdminSPTConfig
parameter
default
enable | disable
enable
Displays the status of the various global parameters for the PIM
sparse mode.
sparse mode.