Alcatel-Lucent 6850-48 参考指南

Health Monitoring Commands

page 50-2

OmniSwitch CLI Reference Guide

Configures thresholds for input traffic (RX), output/input traffic (TX/RX), memory usage, CPU usage, and 
chassis temperature. 

Input traffic, output/input traffic, memory usage, and CPU usage thresholds specify the maximum percent-
age for each resource that may be consumed before a trap is sent to the user. The temperature threshold 
specifies the maximum operating temperature, in Celsius, allowed within the chassis before a trap is sent.

health threshold {rx percent | txrx percent | memory percent | cpu percent | temperature degrees}

Specifies the maximum input (RX) traffic threshold. 

Specifies the maximum output/input (TX/RX) traffic threshold. 

Specifies the maximum RAM memory usage threshold. 

Specifies the maximum CPU usage threshold.

The new threshold value, in percent, for the corresponding resource—
i.e., rx, txrx, memory, cpu—(0–100). 

Specifies the temperature threshold for the chassis.

The new threshold value, in Celsius, for the chassis temperature 
threshold (0–100). 

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• When a resource falls back below the configured threshold, an additional trap is sent to the user. This 

indicates that the resource is no longer operating beyond its configured threshold limit.

• Changing a threshold value sets the value for all levels of the switch (i.e., switch, module, and port). 

You cannot set different threshold values for each level.

• For detailed information on each threshold type, refer to 

, or refer to the “Diagnosing Switch 

Problems” chapter in the OmniSwitch AOS Release 6 Network Configuration Guide.

• To view the current health threshold values, use the 

 command. Do not use the 

 command as it does not display health threshold statistics. These two show 

commands are unrelated.

80

50