Alcatel-Lucent 6850-48 参考指南

QoS Policy Commands

page 53-116

OmniSwitch CLI Reference Guide

Configures a destination port number for a policy condition. 

policy condition condition_name destination port slot/port[-port]

policy condition condition_name no destination port

The name of the condition. May be an existing condition name or a new 
condition.

The slot and port number (or range of ports) on which the frame is 
received.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to remove a destination port from a condition; however, at least one 

classification parameter must be associated with a condition.

• The destination port condition is only applied to bridged traffic, it is not applied to routed traffic.

-> policy condition cond3 destination port 4/2

-> policy condition cond4 destination port 4/3-4

Release 6.1; command was introduced.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about policy conditions configured on the switch.