Alcatel-Lucent 6850-48 参考指南

QoS Policy Commands

page 53-118

OmniSwitch CLI Reference Guide

Associates a source port group with a policy condition. Use the no form of the command to remove a 
source port group from a condition.

policy condition condition_name source port group group_name

policy condition condition_name no source port group

The name of the condition. May be an existing condition name or a new 
condition.

The name of the source port group. Port groups are configured through 
the policy port group command. See 

 for more information 

about this command.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Use the no form of the command to remove a source port group from a condition; however, at least one 
classification parameter must be associated with a condition.

-> policy condition cond6 source port group portgr4

Release 6.1; command was introduced.

Configures a port group and its associated slot and port numbers.

Applies configured QoS and policy settings to the current configuration. 

Creates a policy condition.

Shows information about policy conditions configured on the switch.