Humminbird one deep 安装指导

 

 

Before installing your new Humminbird fishsinder, please ensure the following parts are 
included in the box: 

 

• 

Fishfinder 

• 

Transducer with 20’ (6m) of cable and mounting hardware kit 

• 

Mounting system and mounting hardware kit 

• 

6’ (2m) power cable 

• 

Publications kit 

 

It any of these items is missing, call our Customer Support Hotline. 

 

 

Humminbird offers a wide assortment of accessories that complement and expand the 
capability of your new fishfinder. These accessories are designed with the same high 
standards and are backed by the same one-year warranty. The Humminbird Accessory 
catalog included with your unit contains descriptions of the many accessories available 
and ordering information. All Humminbird accessories are available through your full-
service Humminbird dealer or factory direct through our number listed in the Customer 
Support section. 

 

 

Your Humminbird fishfinder consists of two primary components to install: the control 
head and the transducer. 

 

The control head contains the sonar transmit and receive circuitry, as well as the user 
controls and display. It should be installed in a location that provides access to the 
controls and visibility while in use. The control head mounts on a quick disconnect 
mounting system that swivels and tilts providing flexibility for viewing from almost 
anywhere on the boat. 

 

The transducer converts electrical energy from the transmitter into mechanical pulses or 
sound waves. The transducer also receives the reflected sound waves and converts 
them back into electrical signals for display on the control head. It should be installed in 
contact with the surface of the water in an area that has smooth waterflow- usually on 
the transom of the boat. There are several mounting options for the transducer. Review 
the following section to determine the method that works for you and your boat.