RCA l1510 用户指南

•  Connect all components before you plug any of their power cords into the wall outlet or power strip. NEVER plug 

your TV into an outlet that is controlled by a wall switch.

•  Turn off the TV and/or component(s) before you connect or disconnect any cables.

•  Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions at the 

beginning of the manual.

•  Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.

•  Don’t stack components.

•  If you place components in a stand, make sure you allow adequate ventilation.

•  If you connect an   audio receiver or amplifi er, place it on the top shelf so the heated air from it won’t fl ow around 

other components.

If a stand or base is used ensure that is of adequate size and strength to prevent the TV from being accidentally tipped 
over, pushed off, or pulled off. This could cause personal injury and/or damage the TV. Refer to the Important Safety 
Instructions at the beginning of the manual.

Insert each cable fi rmly into the designated jack.

Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect lighting.

The components used in the connection illustrations are for representation only. The input jacks and the output jacks 
on the back of your components (VCR, DVD player, etc.,) might look different than those illustrated.

Check that the following parts were packed with your product.

AFC030.indb   3

AFC030.indb   3

4/13/05   6:51:08 PM

4/13/05   6:51:08 PM