RCA l1510 用户指南

This section describes the jacks and cables you might use to make connections. There are 
several ways to connect components to your TV. 

Different jacks and cables provide a different level of performance. It’s important to remember 
the different degrees of picture improvement for comparison. The YPbPr (component) jacks 
are considered an excellent improvement; S-Video and Video (composite) jacks are considered 
very good; while the Antenna connection is good.

Bottom Panel
24V or 12V DC POWER IN (24V for model L23W10 and 12V for models L1510 and 
L2010)  Connect the power adapter cord to this jack to give the TV power.

PC IN  Connect your computer to this jack using a 15 pin D-sub cable.

•  Y Pb Pr (Component jacks)  For connection of components that have component output 

jacks (Y Pb Pr), such as an HD receiver, or DVD player.

 

The Y Pb Pr jacks provide excellent picture quality because the video is separated into 
three signals. If your component has Y Pb Pr jacks, use component video cables to connect 
to the TV.

•  AUDIO IN R and L  Use the right and left audio jacks when connecting to the Component 

video inputs. The right connector is usually red; the left connector is usually white.

PC AUDIO IN (Stereo mini jack)  Use to obtain sound when a PC is connected to the PC 
IN jack. Use a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8” stereo mini pin) to 
connect a PC to your TV. Go to page 8 for more information.

AFC030.indb   4

AFC030.indb   4

4/13/05   6:51:09 PM

4/13/05   6:51:09 PM