RCA VR616HF 用户指南
8
Setting Up the VCR
Using the ON-SCREEN guide
The On-Screen Guide is an automated procedure that helps you
set up your VCR. The first time you turn on your VCR, the first
screen of the Guide appears.
set up your VCR. The first time you turn on your VCR, the first
screen of the Guide appears.
Auto-Search Channels
Connect antenna cable...
then press CH UP.
then press CH UP.
Just follow the procedures until setup is complete.
If the menu does not appear:
•
Make sure TV is tuned to the same channel as the 3CH4
switch or TV’s video line input.
switch or TV’s video line input.
•
Make sure VCR indicator is on in the VCR display if you
connected your VCR using the IN FROM ANTENNA and OUT
TO TELEVISION jacks.
connected your VCR using the IN FROM ANTENNA and OUT
TO TELEVISION jacks.
•
Check your connections.
If you choose to set up the VCR options individually, then go to
the next section.
the next section.
USING THE MENU to set up features
You can set up features by using the menu system. The features
in the On-Screen Guide are explained in this section as well as
others you may want to set up before you begin using
your VCR.
in the On-Screen Guide are explained in this section as well as
others you may want to set up before you begin using
your VCR.
language
Select your preferred language, and the on-screen displays will
appear in that language.
appear in that language.
On-Screen Menus
Not all the VCR screens are shown in this
manual when explaining the features.
manual when explaining the features.