RCA VR616HF 用户指南
10
Setting Up the VCR
Auto Channel Search
Use the Auto Channel Search
feature to place all available
channels in memory.
feature to place all available
channels in memory.
If you ever change cable or
antenna signals, you may need to
Auto Channel Search again.
antenna signals, you may need to
Auto Channel Search again.
2.
Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
0 Exit
3.
Press 1 to display the AUTO CHANNEL SEARCH menu.
AUTO CHANNEL SEARCH
What type of signal
are you using?
are you using?
1 Cable TV
2 Antenna
3 Detect Automatically
2 Antenna
3 Detect Automatically
0 Cancel
4.
Select one of the three AUTO CHANNEL SEARCH options.
Choices one and two are self-explanatory. If you choose
Detect Automatically, the VCR automatically detects which
signal system you have attached to your VCR.
Detect Automatically, the VCR automatically detects which
signal system you have attached to your VCR.
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
The VCR begins scanning for the available channels--this
takes about one to two minutes. The lowest channel is
tuned once the search is complete. Now pressing
CHANNEL up or down should only select the active
channels.
takes about one to two minutes. The lowest channel is
tuned once the search is complete. Now pressing
CHANNEL up or down should only select the active
channels.
To Change the Signal Type
1.
Press MENU to display the VCR MAIN MENU.
2.
Press 4 to display the CHANNELS menu.
3.
Press 3 to change the Signal Type between CABLE and
ANTENNA.
ANTENNA.
Detect Automatically
A strong cable or antenna signal in
your area may cause Auto Detect
to mis-detect. If this should
happen, select 1 or 2 for the
system you have.
your area may cause Auto Detect
to mis-detect. If this should
happen, select 1 or 2 for the
system you have.