Netopia r6100 参考指南

If you are configuring your router using a Telnet session, your computer must be running a Telnet software 
program.

■

If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet 
from the Star t menu.

■

If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia 
R6000 Series CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.

You can per form all of the system configuration activities for your Netopia R6000 Series through a local serial 
console connection using terminal emulation software, such as HyperTerminal provided with Windows 95 on the 
PC, or ZTerm, included on the Netopia CD, for Macintosh computers.

The Netopia R6000 Series back panel has a connector labeled “Console” for attaching the Router to a 
computer via the serial por t on the computer. This connection lets you use the computer to configure and 
monitor the Netopia R6000 Series via the console screens.

To connect the Netopia R6000 Series to your computer for serial console communication, use the supplied 
console cable connector.

■

If you connect a PC with Microsoft Windows 95, 98, 2000, or NT, you can use the HyperTerminal 
application bundled with the operating system.

■

If you connect a Macintosh computer, you can use the ZTerm terminal emulation program on the supplied 
Netopia R6000 Series CD.

Console connection por t 
DB-9 (male)

Ethernet

Normal

Auxiliary

Console

Power

8

1

1

Uplink