Sony STR-DA3400ES 快速安装指南
118
GB
D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\110ADD_GB.fm
STRDA3400ESUC\110ADD_GB.fm
masterpage: Left
STR-DA3400ES
3-289-137-41(1)
3-289-137-41(1)
Video
There is no picture or an unclear
picture appears on the TV screen.
picture appears on the TV screen.
• Select the appropriate input on the receiver
• Set your TV to the appropriate input mode.
• Move your audio components away from
• Move your audio components away from
the TV.
• Assign the video input correctly.
• The input signal should be same as input
• The input signal should be same as input
when you are up-converting an input
signal with this receiver (page 32).
signal with this receiver (page 32).
The image of the COMPONENT VIDEO
OUT is corrupted.
OUT is corrupted.
• Video input signals other than 480p
component are not received when signals
are output from the VIDEO jack. Input
480i component video signals.
are output from the VIDEO jack. Input
480i component video signals.
• When component input signals other than
480p are output, use the COMPONENT
VIDEO MONITOR OUT jack and set
“Resolution” to “DIRECT”.
VIDEO MONITOR OUT jack and set
“Resolution” to “DIRECT”.
Recording cannot be carried out.
• Check that the components are connected
correctly (page 24).
• Select the source component using INPUT
SELECTOR (page 49).
The GUI does not appear on the TV
screen.
screen.
• Press GUI MODE repeatedly to select
“GUI ON”. Press MENU if the GUI menu
does not appear on the TVscreen.
does not appear on the TVscreen.
• Check that the TV is connected correctly.
HDMI
The source sound input to the HDMI
jack is not output from the receiver or
the TV speaker.
jack is not output from the receiver or
the TV speaker.
• Check the HDMI connection (page 76).
• You cannot listen to the Super Audio CD
• You cannot listen to the Super Audio CD
by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a connecting cable for the
HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
The source image input to the HDMI
jack is not output from the TV.
jack is not output from the TV.
• Check the HDMI connection (page 76).
• Depending on the playback component,
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a connecting cable for the
HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a Deep Color (Deep Colour)
transmission.