Roland c-180 业主指南

Press an [M1]~[M4] button to load the registration of
the corresponding memory. Do not forget to first
select the Organ or Orchestra mode to have access to
the desired memories.

You can cancel all settings (switch off all tabs) by
pressing the [CANCEL] button.

The C-180 comes with two audio outputs that may
come in handy for two things:

• When you need to perform in a large venue and fear

that the C-180’s on-board amplification system is not
powerful enough, or when you are asked to connect
the C-180 directly to the PA system;

• To record your playing (either with or without

Recorder backing) to cassette, MD, etc.

To do so, connect the C-180 as follows:

After working extensively with your C-180, you may
want to recall the original factory settings.

• Initializing your C-180 means that all four memories

M1 to M4 both in Organ and Orchestra mode  will be
replaced with the original settings except for the
recorder songs that will be empty after initializing
your C-180.

Here is how to initialize your C-180:

1. Switch Off your C-180.

2. Hold down the [SET] button while turning your 
C-180 back on again.

Once the 4 memorie indicators (M1-M4) start flash-
ing, your C-180 has been succesfully initialized.

Cassette deck, MD recorder

external amplifier, mixing console

R

L