Roland g-70 业主指南

r

G-70 Music Workstation

In this section, we will use the word “event” for any 
kind of message.

You can only view and edit one track at a time. There-
fore, be sure to check the TRACK setting before editing 
the events displayed on this page. 

(1) Select and load a (different) song.

This is not necessary if you want to edit the song you 
have just recorded or played back. See “Working with 
the Song Finder” on p. 140 (or page 38) for how to 
load a song.

(2) Press the [16-TRACK¥SEQUENCER] button.

(3) Press the [MICRO¥EDIT] field in the right column. 

(4) Press the [TRACK] field and use the [DATA÷ENTRY] 

dial or the [DEC]/[INC] buttons to select the track 
you want to edit.

(5) Press the white field (the event list) to be able to 

select events using the [DATA÷ENTRY] dial and [ß][†] 
buttons.

■Position indications

The G-70’s sequencer translates all known musical 
techniques and physical effects into MIDI messages 
to precisely reproduce the natural behavior of the 
instrument that is being simulated.

Each event is executed at a given point in time, which 
is why they all have a position indication 
(“1-01-119”, for example). The first figure refers to 
the bar, the second to the beat within that bar and 
the third to the clock (CPT) between the current beat 
and the next. For a 4/4 time signature, each beat 
comprises 120 clocks. The example cited earlier actu-
ally means that the event is located immediately 
before the second beat.

■Monitoring note events

The 16-track Sequencer can play back note events 
you select. This may help you identify the occurrence 
you want to edit. Press the speaker icon ( ) to switch 
this monitor function on and move the cursor to a 
note event to sound that note. 

Note: See also the remark after step (1) on the next page.

■VIEW

Press this button icon if the list has become so long 
that finding the events you wish to edit takes too 
long or to ensure that only the event types you need 
can be selected.

The following pop-up appears:

• Switch on the button icons of events you want to see 

in the list (the icons in question must light in green).
[CONTROL¥CHANGE] also includes the bank select 
messages (CC00 and CC32) that are used for selecting 
sounds (along with the program change numbers 
that can be filtered separately).

• Press [ALL] to switch on all button icons or [NONE] to 

switch them all off, in which case the MICRO EDIT list 
only contains the “End of Data” message.

• Press [CLOSE] to close the pop-up window.