Roland juno-stage 用户指南
132
Chapter 10. Detailed Editing for Performances
The JUNO-STAGE’s performances are organized into two groups:
User and Preset.
User and Preset.
USER
This is a group of rewritable performances inside the JUNO-STAGE.
The performances you create can be saved in this group. When the
JUNO-STAGE is shipped from the factory, this group already contains
64 performances.
The performances you create can be saved in this group. When the
JUNO-STAGE is shipped from the factory, this group already contains
64 performances.
PRST (preset)
This is a group of non-rewritable performances inside the JUNO-
STAGE. Although these performances cannot be rewritten, you are
free to edit the settings of the currently selected performance, and then
save the modified settings in the user performance group.
STAGE. Although these performances cannot be rewritten, you are
free to edit the settings of the currently selected performance, and then
save the modified settings in the user performance group.
A performance contains the patch (rhythm set) assignments for all of
the parts, and includes settings such as volume and pan for each part.
the parts, and includes settings such as volume and pan for each part.
When you switch performances, the settings it contains for parts 1–16
will be called up, along with various other settings that determine how
the JUNO-STAGE responds to your playing.
will be called up, along with various other settings that determine how
the JUNO-STAGE responds to your playing.
1.
Press [PERFORM].
The PERFORM PLAY screen will appear.
2.
Select the performance that you want to edit.
3.
Use the function buttons to access the desired editing screen.
For details, refer to the explanation of each screen.
4.
Use the cursor buttons to select the parameter that you want to
edit.
edit.
5.
Use the VALUE dial or [DEC] [INC] to edit the value.
6.
When you’ve finished editing, press [EXIT].
You will return to the PERFORM PLAY screen.
If you return to the PERFORM PLAY screen without saving the
changes you made, an “*” will be displayed at the left of the
performance group.
changes you made, an “*” will be displayed at the left of the
performance group.
If you turn off the power or select a different sound when the “*”
is displayed, the changes you made will be discarded. If you
want to keep the changes, save the performance (p. 133).
is displayed, the changes you made will be discarded. If you
want to keep the changes, save the performance (p. 133).
Here’s how to initialize the settings of the currently selected
performance to their default values.
performance to their default values.
Initialization will affect only the currently selected performance. If
you want to return all settings to their factory-set state, execute the
Factory Reset operation (p. 155).
you want to return all settings to their factory-set state, execute the
Factory Reset operation (p. 155).
1.
In the PERFORM PLAY screen, select the performance that you
want to initialize.
want to initialize.
2.
Hold down [SHIFT] and press [7 (INIT)].
The Performance Initialize window will appear.
3.
Use [
] [
] to select the desired method of initialization.
4.
Press [7 (SELECT)].
A confirmation message will appear.
If you decide to cancel, press [6 (CANCEL)].
5.
Press [7 (EXEC)] to initialize the settings.
How to Edit a Performance
Initializing a Performance
Setting
Content
Default
Initializes the settings of the currently
selected performance to their default
values.
selected performance to their default
values.
Sound Control
Initializes the following part parameters.
Cutoff Offset,
Resonance Offset,
Attack Time Offset,
Release Time Offset,
Decay Time Offset,
Vibrato Rate,
Vibrato Depth,
Vibrato Delay
Resonance Offset,
Attack Time Offset,
Release Time Offset,
Decay Time Offset,
Vibrato Rate,
Vibrato Depth,
Vibrato Delay
JUNO-STAGE_e.book 132 ページ ２００８年１０月１７日 金曜日 午後１２時２７分