Roland juno-stage 用户指南
96
Chapter 8. Detailed Editing for Patches
9.
Repeat steps 5–8 to edit the parameters as desired.
10.
If you decide not to save the changes you made, press [EXIT] to
exit the PRO EDIT screen.
exit the PRO EDIT screen.
If you exit the PRO EDIT screen without saving, an “*” will be
displayed in the PATCH PLAY screen of Patch mode.
displayed in the PATCH PLAY screen of Patch mode.
If you turn off the power or select a different sound when the “*”
is displayed, the patch settings you edited will be lost.
is displayed, the patch settings you edited will be lost.
Here’s how to return (initialize) the settings of the currently selected
patch to their default values.
patch to their default values.
Initialization will affect only the currently selected patch. If you
want to return all settings to their factory-set state, execute the
Factory Reset operation (p. 155).
want to return all settings to their factory-set state, execute the
Factory Reset operation (p. 155).
1.
In Patch mode or Performance mode, select the user patch that
you want to initialize.
you want to initialize.
For details, refer to “Selecting Patches in Patch Mode” (p. 45) or
“Selecting a Patch for Each Part” (p. 50).
“Selecting a Patch for Each Part” (p. 50).
2.
Press [EDIT].
3.
Either press [3], or use the VALUE dial to select “PATCH EDIT” and
press [ENTER].
press [ENTER].
The ZOOM EDIT screen will appear.
4.
Hold down [SHIFT] and press [6 (INIT)].
A confirmation message will appear.
If you decide to cancel, press [6 (CANCEL)].
5.
Press [7 (EXEC)] to initialize the patch.
Here’s how to copy the tone settings of a desired patch to the currently
selected patch.
selected patch.
1.
In Patch mode or Performance mode, select the copy-destination
user patch.
user patch.
For details, refer to “Selecting Patches in Patch Mode” (p. 45) or
“Selecting a Patch for Each Part” (p. 50).
“Selecting a Patch for Each Part” (p. 50).
2.
Press [EDIT].
3.
Either press [3], or use the VALUE dial to select “PATCH EDIT” and
press [ENTER].
press [ENTER].
The ZOOM EDIT screen will appear.
4.
Hold down [SHIFT] and press [7 (TONE CPY)].
The Patch Tone Copy window will appear.
fig.disp-tonecopy.eps
5.
Use the cursor buttons to move the cursor, and use the VALUE dial
or [DEC] [INC] to select the desired “Source (copy-source)” group,
number, and tone.
or [DEC] [INC] to select the desired “Source (copy-source)” group,
number, and tone.
If you press [5 (COMPR)] to apply a check mark (
✔
), you’ll be
able to play the copy-source patch (Compare function).
6.
Use the cursor buttons to move the cursor, and select the
“Destination (copy-destination)” tone.
“Destination (copy-destination)” tone.
7.
Press [7 (EXEC)].
A confirmation message will appear.
If you decide to cancel, press [6 (CANCEL)].
8.
Press [7 (EXEC)] to execute the copy.
Initializing a Patch
Copying Patch (Tone) Settings
Compare function
When copying patch tones or saving patches, it’s often
convenient to use the Compare function.
convenient to use the Compare function.
If you want to hear the copy-source (or save-destination) patch,
press [5 (COMPR)] to apply a check mark (
press [5 (COMPR)] to apply a check mark (
✔); now you can use
the keyboard to play the copy-source (or save-destination) patch.
* The patch may sound slightly different than normal when
played via the Compare function.
JUNO-STAGE_e.book 96 ページ ２００８年１０月１７日 金曜日 午後１２時２７分