Roland RD-700SX 业主指南
111
Error Messages/Other Messages
Error Messages
Indication:
MIDI Buffer Full
Situation:
Due to an inordinate volume of MIDI messages
received, the RD-700SX has failed to process
them properly.
received, the RD-700SX has failed to process
them properly.
Action:
Reduce the amount of MIDI messages to be
transmitted.
transmitted.
Indication:
MIDI Communication Error
Situation:
A problem has occurred with the MIDI cable
connections.
connections.
Action:
Check that MIDI cables are not broken or pulled
out.
out.
Indication:
BULK DUMP: Receive Data Error
Situation:
A MIDI message was received incorrectly.
Action:
If the same error message is displayed
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the RD-
700SX.
repeatedly, there is a problem with the MIDI
messages that are being transmitted to the RD-
700SX.
Indication:
File Error
Situation:
A file can’t be read. Or a file may be broken.
Action:
Be sure you’re using
Standard MIDI Files (“MID” is
used as the extension)
and
Setup Files (“RDS“ is used
as the extension)
.
Indication:
System Error
Situation:
There may be a problem with the system.
Action:
Turn on the power once again, then repeat the
procedure.
procedure.
Other Messages
Indication:
Now, writing Bulk Dump Data. Keep on
POWER!!
Situation:
Indicated when Bulk Dump data is being
received.
received.
Action:
Once received, the data is written to the RD-
700SX’s internal memory; be absolutely sure not
to turn off the power until “COMPLETED”
appears in the display.
700SX’s internal memory; be absolutely sure not
to turn off the power until “COMPLETED”
appears in the display.
Indication:
Unavailable while in Rec Mode
Situation:
This is displayed when the [EXTERNAL/
INTERNAL] button is pressed with Rec Mode
“ON.”
INTERNAL] button is pressed with Rec Mode
“ON.”
Action:
When Rec Mode is “ON,” you cannot change
the External settings. To make changes to the
External settings, set Rec Mode to “OFF”
(p. 101).
the External settings. To make changes to the
External settings, set Rec Mode to “OFF”
(p. 101).
Indication:
Memory Full!
Situation:
There is not sufficient space left on the user
memory.
memory.
Action:
Delete files stored on the RD-700SX memory.
Indication:
File Exists. Overwrite OK?
Situation:
A file with the same name is already exists.
Action:
If you execute the procedure, the file will be
overwrite. If you don’t want to overwrite,
change a filename.
overwrite. If you don’t want to overwrite,
change a filename.
Indication:
Can not Save
Situation:
The save could not be performed correctly.
Action:
The internal memory capacity of the RD-700SX
may be full. Delete files stored on the RD-700SX
memory.
may be full. Delete files stored on the RD-700SX
memory.
Indication:
Can not Delete
Situation:
The data cannot be deleted.
Action:
Select the File Type to “ALL FILES” in the
DELETE screen, then repeat the procedure.
DELETE screen, then repeat the procedure.
Indication:
Panel is Locked
Situation:
Buttons will not function.
Action:
Press [EXIT] to cancel.
RD-700SX_e.book 111 ページ ２００７年９月１２日 水曜日 午前１１時１０分