Roland PCR-1 业主指南
61
Use MIDI functionality
Assign MIDI messages (EDIT)
You can assign the following functions to a controller.
You will use Edit mode to assign MIDI messages.
You will use Edit mode to assign MIDI messages.
* If you want to assign a single-byte system message (system realtime message, tune request) or a freely
specified message of up to 24 bytes, refer to
Edit mode ( EDIT )
fig.EDIT2_90
NOTE
You can copy assigned messages to
another controller, or cancel an as-
signment. For details, refer to
another controller, or cancel an as-
signment. For details, refer to
AFTERTOUCH
CONTROL CHANGE
PROGRAM CHANGE
RPN
NRPN
Sys Ex
TEMPO (20-250)
1
How Basic mode and Advanced mode differ
The assignment s “NOTE“, “AFTERTOUCH“, “CONTROL CHANGE“, “PROGRAM
CHANGE“
CHANGE“
, “RPN“, “NRPN“, “Sys Ex.“ can be made either in Basic mode or Advanced mode.
Use the mode that is appropriate for your purpose.
• Basic mode
:You can make assignments easily, with the minimum number of steps.
• Advanced mode :A greater number of steps are required, but you can specify more
parameters and make more sophisticated assignments.
* For these assignments, the rightmost digit (third place) in the display is a number that indicates the mode
(Basic mode or Advanced mode).
PCR-1_e.book 61 ページ ２００４年３月１６日 火曜日 午後２時５５分