Roland PCR-1 业主指南

 

Use MIDI functionality

When you make Assign settings (p. 61) in Edit mode to assign a message to a button, you must 
specify the operating mode of the button (button mode).
When you use a button as a controller, turning the button on will transmit the maximum 
specified value, and turning it off will transmit the minimum value.

1. Press the [0] or [1] key to select either Latch mode or Toggle mode.

2. Press the [ENTER] button.

The setting will turn on when you press the button, and off 
when you release it. The button will remain lit while you are 
pressing it.

The setting will alternate on/off each time you press the but-
ton. The button will light when an On message is transmitted, 
and will go dark when an Off message is transmitted.

When you are making Assign settings (p. 61) in Edit mode and have selected Advanced mode, 
you must specify the USB port to which the message assigned to the controller will be sent 
when using a USB connection.

1. Press a key [1] – [3] to select the port.

2. Press the [ENTER] button.

Messages will be sent to “PCR-1 1”

Messages will be sent to “PCR-1 2”

Messages will be sent to both “PCR-1 1” and “PCR-1 2”

PCR-1_e.book 62 ページ ２００４年３月１６日　火曜日　午後２時５５分