Roland PCR-30 业主指南

Edit mode (EDIT)

Transmit bulk data from your sequencer or other device.

Specify “PCR” (Mac OS 9/8: PCR 1) as the MIDI output device for your sequencer software. 
For details on this setting, refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to 

fig.end

When the PCR finishes receiving the bulk data, the display will 
indicate “END”.

Confirm what’s indicated and press the 

 button.

fig.bulk-dis

Transmit

Receive

ALL

BULK

SINGLE

BULK

1st digit:

indicates Receive mode or 

Transmit mode

 receiving

 transmitting

Waiting to receive 
(blinking)

Waiting to transmit 
(blinking)

Transmitting 

2nd digit: 

Single Bulk or All Bulk

3rd digit: indicates 

Transmitting/Receiving/Waiting states

fig.err

If the data could not be received correctly, the display will blink “ERR”.
If this occurs, press the 

 button to cancel the “ERR” display.

Once "ERR" has been dismissed, perform the bulk reception procedure over again, from step 1.