Roland PCR-30 业主指南

Edit mode (EDIT)

■

fig.edt

Press the 

 button.

The display will indicate “EDT”.

Press the 

 key.

Press the 

 key.

fig.blt

The display will blink “BLT” (Bulk Transmit).

Confirm what’s indicated and press the 

 button.

fig.ts

The display will indicate “TS”, and the “S” will blink.

Use the 

 buttons or the 

  

 keys to select the mode.

Confirm what’s indicated and press the 

 button.

fig.bs-1

The third digit of the display will blink, and the PCR-30/50/80 will wait 
to transmit bulk data.

Press the 

 button.

On your sequencer software, specify “PCR 2” as the MIDI input device. For details on this setting, 
refer to the manual of your sequencer software.
For details on the port that will be used to transfer bulk data, refer to 

fig.end

When the PCR finishes receiving the bulk data, the display will 
indicate “END”.

Confirm what’s indicated and press the 

 button.

The currently recalled memory (the current 
memory) will be transmitted as bulk data

All memories (memories 1–F) will be transmitted 
as bulk data.