Roland RD-700GX 用户指南
148
No Sound in a Specific
Range
Range
Has the range in which sounds are to be played (the key range) been set?
Check following settings.
Check following settings.
• Settings for the LWR and UPR Parts in the EXTERNAL screen
• Key Range settings in ZONE INFO
• Key Range settings in ZONE INFO
With certain Tones, for example Rhythm Sets, bass Tones, Timpani, and other Tones will not
sound if a portion of the Tone falls outside the recommended range.
sound if a portion of the Tone falls outside the recommended range.
—
Is V-LINK switched on?
• Set the Local ON/OFF to ON in the V-LINK Setting in Edit mode.
Sounds are played with keyboard even when V-LINK is switched on.
Tones Are Altered
Did you call up a Setup?
• When a Setup is called up, the current Tone, effect, and other settings are disabled, and the
selected Setup goes into effect. Resave required settings to a Setup.
Did you press the ONE TOUCH [PIANO] button or the ONE TOUCH [E. PIANO] button?
• When the ONE TOUCH [PIANO] button or the ONE TOUCH [E. PIANO] button is pressed, the
current Tone, effect, and other settings are disabled, and settings for use in piano performances
go into effect. Resave required settings to a Setup.
go into effect. Resave required settings to a Setup.
Is the Tone Control function assigned to the ZONE LEVEL slider?
• Check the Slider Assign settings of Control in Edit mode.
When a mono connection is used, the tone quality can vary depending on the tone selected
and the register in which it is used.
and the register in which it is used.
• For optimal listening quality, connecting in stereo is recommended.
• “24 ExpresivMono,” “25 SuperiorMono,” or “26 GrandRD Mono” is recommended when
• “24 ExpresivMono,” “25 SuperiorMono,” or “26 GrandRD Mono” is recommended when
performing with piano tones using a mono connection.
—
When UPPER Tone is
Selected, LOWER
Changes to Same Tone
Selected, LOWER
Changes to Same Tone
Are the UPPER Part and the LOWER Part set to the same value in the Part Assign settings in
ZONE INFO?
ZONE INFO?
Tone Doesn’t Change/
Keyboard Not Switching
to Split
Keyboard Not Switching
to Split
Is the EXTERNAL indicator lit?
• When the EXTERNAL indicator is lit, the external sound generator is controlled. To change the
RD-700GX’s Tones and make settings in Keyboard mode, set the EXTERNAL indicator to OFF.
Is the Zone containing the Tone you want to change set to ON?
Is the [NUM LOCK] button set to on?
• Tone categories cannot be selected with the TONE SELECT buttons when the [NUM LOCK] button
is set to on.
Rhythm Not Sounding
Has the System Clock Source setting in Edit mode been set to EXT?
Do you have an external MIDI device connected?
Do you have an external MIDI device connected?
• You cannot set the tempo with the RD-700GX when Clock Source is set to EXT. Accordingly, if
no external MIDI device is connected, then no tempo setting is made for the Rhythm, and so the
Rhythm does not sound.
Rhythm does not sound.
Set the Part 10 Receive Channel setting in Part Parameter in Edit mode to 10.
Could a song be playing, or could the Audio Key function be on?
Multi-effect does not
Apply
Apply
Check the MFX Source and MFX Dest settings.
• With certain settings, the MFX settings are disregarded.
Problem
Check/Solution
Page
RD-700GX_e.book 148 ページ 2008年2月13日 水曜日 午後5時49分