Roland RD-300SX 业主指南
42
Settings for Each Function ([EDIT])
Adjusts the pitch of the tone’s sound up or down in 1-cent steps
(+/-50 cents).
(+/-50 cents).
One cent is 1/100th of a semitone.
This sets the amount of pitch change that will occur when you move
the Pitch Bend lever
in semitone increments
(+/-2 octaves).
1.
Press [EDIT].
The indicator lights, and the RD-300SX switches to Edit mode.
2.
Press [INC] or [DEC] to select “U-L,” then press [ENTER].
fig.disp.U-L
3.
Referring to the following, press the TONE SELECT button
to which the parameter you want to change is assigned.
to which the parameter you want to change is assigned.
The parameter name appears in the display while the button is
held down. When the button is released, the value for the
parameter is shown in the display.
held down. When the button is released, the value for the
parameter is shown in the display.
When setting the LOWER zone, set [LOWER SELECT] to ON.
Only the indicators of buttons to which a parameter is assigned
blink.
blink.
4.
Press [INC] or [DEC] to set the value.
5.
Press [EDIT] to turn off the indicator and quit editing.
You can return to Step 2 by pressing [EXIT].
Changing the Pitch (Fine Tune)
Value
-50 – 50 (cent)
Changing the Bend Range
(Bend Range)
Value
0–24
Making the Settings for
Each Zone Individually
(Zone Parameter)
How to Make Settings
TONE
SELECT
button
SELECT
button
Indication
Parameter
PIANO
Key Transpose
E.PIANO
Pan
ORGAN
Damper Pedal Switch
STRINGS/
PAD
PAD
Control Pedal Switch
GUITAR/
BASS
BASS
Bender Switch
BRASS/
WINDS
WINDS
Modulation Switch
VOICE/
SYNTH
SYNTH
—
—
RHY/GM2
—
—
RD-300SX_e.book 42 ページ 2005年12月26日 月曜日 午後8時37分