Roland SH-201 业主指南

 

fig.WAVE-EXTIN

 

When you play the keyboard, you will hear the sound from the audio source connected to the INPUT jacks 
according to the settings of FILTER (p. 34), AMP (p. 38), LFO (p. 40), and EFFECTS (p. 44) in the same way as for 
an OSC waveform.

 

• The key you press will not change the pitch of the sound. The sound from the connected audio source device 

will be heard at its original pitch regardless of the key you press.

• If you press more than one key, the sound from the connected device will be layered according to the number of 

keys you’re pressing.
Since the sound may distort if you press a larger number of keys, we recommend that you turn on the Solo 
function (p. 19).

• When using the OSC EXT IN setting to play the sound of an external audio source, the sound you hear will be 

mono even if the audio source connected to the INPUT jack is stereo.

 

For some settings, such as when the AMP LEVEL is lowered or when the FILTER CUTOFF is at the lowest 
setting, you might not hear any sound when you play the keyboard.

• If the AMP ENV’s R (release time, p. 38) is set to a longer time, the sound that’s passing through the audio filter 

will not be heard when you take your hand off the keyboard until the release time has elapsed. We recommend 
that you set the AMP ENV release time to a short value.

Sound heard when you
release the keyboard

Sound heard when you
play the keyboard

Digital audio player,
CD player, etc.

AUDIO FILTER

INPUT

jacks

OUTPUT

jacks

OSC

MIX/MOD, FILTER, 

AMP, LFO, EFFECTS

SH-201_r_e.book 52 ページ ２００６年４月２７日　木曜日　午前１１時２８分