Roland SH-201 业主指南
63
Parameter list
Parameter list
EFFECTS parameters
Parameter
Value
Explanation
Panel operation
DELAY
DELAY
Switch
Switch
OFF, ON
Turns DELAY on/off.
1.
Press the EDIT
button so the
DELAY indi-
cator is lit
button so the
DELAY indi-
cator is lit
2.
HF DAMP
200, 250, 315, 400,
500, 630, 800, 1000,
1250, 1600, 2000,
2500, 3150, 4000,
5000, 6300, 8000
(Hz), BYPASS
500, 630, 800, 1000,
1250, 1600, 2000,
2500, 3150, 4000,
5000, 6300, 8000
(Hz), BYPASS
Adjusts the frequency above which the
high-frequency content of the delay sound
will be reduced.
high-frequency content of the delay sound
will be reduced.
If you do not want to reduce the high fre-
quencies, set this parameter to BYPASS.
quencies, set this parameter to BYPASS.
2.
Hold down the FX ON button
and turn the DEPTH knob
and turn the DEPTH knob
TIME
0–127
Adjusts the spacing between delay sounds
(the delay time).
(the delay time).
2.
DEPTH
LOWER
LOWER
0–127
Adjusts the amount of delayed sound (the
delay level).
delay level).
2.
Press the LOWER button and
then turn the DEPTH knob (p. 45)
then turn the DEPTH knob (p. 45)
DEPTH
UPPER
UPPER
0–127
Adjusts the amount of delayed sound (the
delay level).
delay level).
2.
Press the UPPER button and then
turn the DEPTH knob (p. 45)
turn the DEPTH knob (p. 45)
FEEDBACK
-98– +98 (%)
Adjusts the amount of the delay sound fed
back into the effect.
back into the effect.
Negative (-) settings invert the phase.
2.
Hold down the FX ON button
and turn the TIME knob
(selectable value: 0– +98)
and turn the TIME knob
(selectable value: 0– +98)
MODULA-
TION RATE
TION RATE
0–127
Specifies the speed of modulation that will
be applied to the delay sound.
be applied to the delay sound.
2.
Hold down the FX ON button
and move the AMP ENV R slider
and move the AMP ENV R slider
MODULA-
TION DEPTH
TION DEPTH
0–127
Specifies the depth of modulation that will
be applied to the delay sound.
be applied to the delay sound.
2.
Hold down the FX ON button
and move the AMP ENV S slider
and move the AMP ENV S slider
REVERB
REVERB
Switch
Switch
OFF, ON
Turns REVERB on/off.
1.
Press the EDIT
button so the
REVERB indi-
cator is lit
button so the
REVERB indi-
cator is lit
2.
PRE DELAY
0.0–100.0 (ms)
Adjusts the delay time from the direct
sound until the reverb sound is heard.
sound until the reverb sound is heard.
2.
Hold down the FX ON button
and turn the TIME knob
and turn the TIME knob
SIZE
1–8
Specifies the size of the simulated room or
hall.
hall.
2.
Hold down the FX ON button
and move the FILTER ENV R
slider
and move the FILTER ENV R
slider
HIGH CUT
160, 200, 250, 320,
400, 500, 640, 800,
1000, 1250, 1600,
2000, 2500, 3200,
4000, 5000, 6400,
8000, 10000, 12500
(Hz), BYPASS
400, 500, 640, 800,
1000, 1250, 1600,
2000, 2500, 3200,
4000, 5000, 6400,
8000, 10000, 12500
(Hz), BYPASS
Adjusts the frequency above which the
high-frequency content of the reverb sound
will be reduced.
high-frequency content of the reverb sound
will be reduced.
If you do not want to reduce the high fre-
quencies, set this parameter to BYPASS.
quencies, set this parameter to BYPASS.
2.
Hold down the FX ON button
and turn the DEPTH knob
and turn the DEPTH knob
TIME
0–127
Adjusts the length of reverberation (the re-
verb time).
verb time).
2.
DEPTH
LOWER
LOWER
0–127
Adjusts the amount of reverb sound (the re-
verb level).
verb level).
2.
Press the LOWER button and
then turn the DEPTH knob (p. 45)
then turn the DEPTH knob (p. 45)
DEPTH
UPPER
UPPER
0–127
Adjusts the amount of reverb sound (the re-
verb level).
verb level).
2.
Press the UPPER button and then
turn the DEPTH knob (p. 45)
turn the DEPTH knob (p. 45)
DENSITY
0–127
Adjusts the density of reverb.
2.
Hold down the FX ON button
and move the FILTER ENV S slid-
er
and move the FILTER ENV S slid-
er
HF DAMP
FREQUENCY
FREQUENCY
4000, 5000, 6400,
8000, 10000, 12500
(Hz)
8000, 10000, 12500
(Hz)
Adjusts the frequency above which the
high-frequency content of the reverb sound
will be reduced or “damped.”
high-frequency content of the reverb sound
will be reduced or “damped.”
2.
Hold down the FX ON button
and move the AMP ENV S slider
and move the AMP ENV S slider
HF DAMP
GAIN
GAIN
-36–0 (dB)
Adjusts the amount of damping applied to
the high-frequency range.
the high-frequency range.
2.
Hold down the FX ON button
and move the AMP ENV R slider
and move the AMP ENV R slider
DIFFUSION
0–127
Adjusts the change in the density of the re-
verb over time.
verb over time.
The higher the value, the more the den-
sity increases with time.
sity increases with time.
2.
Hold down the FX ON button
and move the FILTER ENV D
slider
and move the FILTER ENV D
slider
LF DAMP
FREQUENCY
FREQUENCY
50, 64, 80, 100, 125,
160, 200, 250, 320,
400, 500, 640, 800,
1000, 1250, 1600,
2000, 2500, 3200,
4000 (Hz)
160, 200, 250, 320,
400, 500, 640, 800,
1000, 1250, 1600,
2000, 2500, 3200,
4000 (Hz)
Adjusts the frequency below which the low-
frequency content of the reverb sound will
be reduced or “damped.”
frequency content of the reverb sound will
be reduced or “damped.”
2.
Hold down the FX ON button
and move the AMP ENV A slider
and move the AMP ENV A slider
LF DAMP
GAIN
GAIN
-36–0 (dB)
Adjusts the amount of damping applied to
the low-frequency range.
the low-frequency range.
2.
Hold down the FX ON button
and move the AMP ENV D slider
and move the AMP ENV D slider
SH-201_r_e.book 63 ページ ２００６年４月２７日 木曜日 午前１１時２８分