Roland v-synth xt 业主指南
16
Panel Descriptions
[
], [
], [
], [
] (Cursor Buttons)
Moves the cursor location up/down/left/right.
→
[SHIFT] key and use the cursor up/down [
][
] keys to alter
the function of the E1–E8 knobs.
By holding down the [SHIFT] key and using the cursor left/right
([
][
]) keys you can switch the zone displayed in the
POWER Switch
Press to turn the power on/off.
→
Rear Panel
fig.00-02
AC Inlet
Connect the included power cord to this inlet.
DIGITAL AUDIO INTERFACE
Connector (OPTICAL IN/OUT, COAXIAL
IN/OUT)
IN/OUT)
(conforming to IEC60958).
These connectors input/output a digital audio signal (stereo). The
output signal is identical to the signal that is output from the MAIN
OUT jacks.
output signal is identical to the signal that is output from the MAIN
OUT jacks.
MIDI Connectors (IN, OUT, THRU)
These connectors can be connected to other MIDI devices to receive
and transmit MIDI messages.
and transmit MIDI messages.
INPUT Jacks (L, R)
An external audio source such as a CD player can be connected to
these jacks for sampling or external input.
these jacks for sampling or external input.
* The audio signal received via the INPUT jacks can be switched on/off
by the
* * The gain of the audio signal received via the INPUT jacks is adjusted
by the
DIRECT OUT Jacks (L, R)
(1/4 inch phone type)
This jack is a stereo output of the sound unprocessed by onboard
effects. An external effects processor or other devices can be
connected to these jacks.
effects. An external effects processor or other devices can be
connected to these jacks.
MAIN OUT Jacks (L (MONO), R)
(1/4 inch TRS phone type)
These jacks output the audio signal to the connected mixer/amplifier
system in stereo. For mono output, use the L jack.
system in stereo. For mono output, use the L jack.
→
17
1
2
3
4
5
6
1
2
3
4
5
6
V-SYNTH_XT_e2 16 ページ ２００５年３月２３日 水曜日 午後４時３９分