Roland v-synth xt 业主指南

 

−>

 

This effect reproduces the sound of the BOSS CE-1 Chorus 
Ensemble. To reproduce the sound of the unit at the time, a 
monaural analog-type delay is first inserted in series.

 

fig.MFX-16

 

This is a stereo chorus or flanger. Equalizers are provided before 
(Pre) and after (Post) the chorus (or flanger).

 

fig.MFX-17

 

Dly Sw

OFF, ON

Turns the delay on/off.

Dly Repeat Rate 
#1

0–127

Corresponds to the delay time in 
a delay effects.

Dly Intensity #2 0–127

Corresponds to the feedback set-
ting in a delay effects.

Dly Level

0–127

Sets the volume of the delay 
sound.

Chorus Sw

OFF, ON

Turns chorus or vibrato on/off.

Chorus Mode

CHORUS, VI-
BRATO

Switches the sound between 
chorus and vibrato modes.

Chorus Intensi-
ty #3

0–127

When Chorus Mode is CHO-
RUS, this sets the pitch vibrato 
speed.

Vibrato Depth

0–127

When Chorus Mode is VIBRA-
TO, this sets the pitch vibrato 
depth.

Vibrato Rate

0–127

When Chorus Mode is VIBRA-
TO, this sets the pitch vibrato 
speed.

Chorus Out 
Mode

MONO, ST-1, 
ST-2

Switches the output format 
(mono/stereo).
MONO: Output is monaural.
ST-1: Chorus sound of the pitch 
vibration which phase is invert-
ed between left and right is 
mixed with the source sound. 
This is a broader chorus, with a 
weaker feeling of placement.
ST-2: The left output contains 
the source sound, and the right 
side has the wavering chorus 
sound.

L

R

Analog

Delay

Analog
Chorus

 

Mode

CHORUS, 
FLANGER

Selects either chorus or flanger.

Rate #1

0.05–10.0 Hz, 
note

Sets the cycle for the chorus or 
flanger sound undulations.

Depth

0–127

Adjusts the depth of modulation 
for the chorus or flanger.

Phase

0–180 deg

Specifies the spaciousness of the 
chorus or flanger sound.

Pre Low Freq

50–4000 Hz

Frequency of the low range (Pre)

Pre Low Gain

-15– +15 dB

Gain of the low range (Pre)

Pre Hi Freq

2000–20000 Hz

Frequency of the high range 
(Pre)

Pre Hi Gain

-15– +15 dB

Gain of the high range (Pre)

Pre Dly Time

0–50.0 ms

Adjusts the delay time from the 
direct sound until the chorus or 
flanger sound is heard.

Feedback

-98– +98%

Adjusts the proportion of the 
chorus or flanger sound that is 
fed back into the effect. Negative 
(-) settings will invert the phase.

Xover LowFreq 50–4000 Hz

Attenuates the effect in the 
range below the specified fre-
quency.

Xover Low Gain -36–0 dB

Specifies how greatly the low 
range will be attenuated.

Xover HiFreq

2000–20000 Hz

Attenuates the effect in the 
range above the specified fre-
quency.

Xover Hi Gain

-36–0 dB

Specifies how greatly the high 
range will be attenuated.

Modulation 
Level

0–127

Volume of the chorus or flanger 
sound.

Ps Low Freq

50–4000 Hz

Frequency of the low range 
(Post)

Ps Low Gain

-15– +15 dB

Gain of the low range (Post)

Ps Hi Freq

2000–20000 Hz

Frequency of the high range 
(Post)

Ps Hi Gain

-15– +15 dB

Gain of the high range (Post)

L

R

2-Band

EQ

Chorus/
Flanger

2-Band

EQ

V-SYNTH_XT_e2 173 ページ ２００５年３月２３日　水曜日　午後４時３９分