Roland v-synth xt 业主指南
190
Effects List
07: Garage
This simulates the reverberation of a garage. It produces the
reverberation of a room surrounded by hard-surfaced walls with
many reflections.
reverberation of a room surrounded by hard-surfaced walls with
many reflections.
08: PLATE
Simulates plate reverberation (a reverb unit that uses the vibration of
a metallic plate).
a metallic plate).
Parameter
Value
Description
Pre Low Freq
50–4000 Hz
Frequency of the low range
Pre Low Gain
-15– +15 dB
Gain of the low range
Pre Mid Freq
50–20000 Hz
Frequency of the middle
range
range
Pre Mid Q
0.5, 0.7, 1.0, 2.0,
4.0, 8.0
4.0, 8.0
Gain of the middle range
Set a higher value for Q to
narrow the range to be af-
fected.
Set a higher value for Q to
narrow the range to be af-
fected.
Pre Mid Gain
-15– +15 dB
Gain of the middle range
Pre Hi Freq
2000–20000 Hz
Frequency of the high
range
range
Pre Hi Gain
-15– +15 dB
Gain of the high range
Reverb Time
0.06–32.00 sec
Duration (time) of the re-
verb
verb
Pre Dly Time
0.0–200.0 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard.
the direct sound until the
delay sound is heard.
Density
0–99
Density of the reverb
Room Size
1–8
Size of the room which is
simulated
simulated
Early Ref Level
0–99
Volume level of the initial
reflected sound
reflected sound
Release Density
0–99
Density of the sound that
reaches the listener after
many repeated reflections
reaches the listener after
many repeated reflections
Low Damp Freq
50–4000 Hz
Adjusts the frequency be-
low which sound fed back
to the effect will be cut.
The Low Damp function
damps the low frequency
band of the reverb sound
quicker than other bands.
low which sound fed back
to the effect will be cut.
The Low Damp function
damps the low frequency
band of the reverb sound
quicker than other bands.
Low Damp Gain
-36–0 dB
Degree of Low Damp
Hi Damp Freq
2000–20000 Hz
Adjusts the frequency
above which sound fed
back to the effect will be
cut.
High Damp, by attenuating
the higher frequencies first.
above which sound fed
back to the effect will be
cut.
High Damp, by attenuating
the higher frequencies first.
Hi Damp Gain
-36–0 dB
Degree of High Damp
Post HC Freq
160–15000 Hz,
THRU
THRU
Frequency at which the
high cut filter will begin to
take effect (THRU: no filter
is used)
high cut filter will begin to
take effect (THRU: no filter
is used)
Parameter
Value
Description
Pre Low Freq
50–4000 Hz
Frequency of the low range
Pre Low Gain
-15– +15 dB
Gain of the low range
Pre Mid Freq
50–20000 Hz
Frequency of the middle
range
range
Pre Mid Q
0.5, 0.7, 1.0, 2.0,
4.0, 8.0
4.0, 8.0
Gain of the middle range
Set a higher value for Q to
narrow the range to be af-
fected.
Set a higher value for Q to
narrow the range to be af-
fected.
Pre Mid Gain
-15– +15 dB
Gain of the middle range
Pre Hi Freq
2000–20000 Hz
Frequency of the high
range
range
Pre Hi Gain
-15– +15 dB
Gain of the high range
Low Rev Time
0.06–32.00 sec
Duration (time) of the re-
verb for the low frequency
band.
verb for the low frequency
band.
Hi Rev Time
0.06–32.00 sec
Duration (time) of the re-
verb for the high frequency
band
verb for the high frequency
band
Xover Freq
160–15000 Hz,
THRU
THRU
The reverberation specified
by the Low Rev Time will
be applied to the range be-
low this frequency, and by
the Hi Rev Time to the
range above this frequency.
by the Low Rev Time will
be applied to the range be-
low this frequency, and by
the Hi Rev Time to the
range above this frequency.
Pre Dly Time
0.0–200.0 ms
Adjusts the delay time from
the direct sound until the
delay sound is heard.
the direct sound until the
delay sound is heard.
Density
0–99
Density of the reverb
Room Size
5.6–34.7 m
Size of the room which is
simulated
simulated
Early Ref Level
0–99
Volume level of the initial
reflected sound
reflected sound
Release Density
0–99
Density of the sound that
reaches the listener after
many repeated reflections
reaches the listener after
many repeated reflections
Low Damp Freq
50–4000 Hz
Adjusts the frequency be-
low which sound fed back
to the effect will be cut.
The Low Damp function
damps the low frequency
band of the reverb sound
quicker than other bands.
low which sound fed back
to the effect will be cut.
The Low Damp function
damps the low frequency
band of the reverb sound
quicker than other bands.
Low Damp Gain
-36–0 dB
Degree of Low Damp
Hi Damp Freq
2000–20000 Hz
Adjusts the frequency
above which sound fed
back to the effect will be
cut.
High Damp, by attenuating
the higher frequencies first.
above which sound fed
back to the effect will be
cut.
High Damp, by attenuating
the higher frequencies first.
Hi Damp Gain
-36–0 dB
Degree of High Damp
Post HC Freq
160–15000 Hz,
THRU
THRU
Frequency at which the
high cut filter will begin to
take effect (THRU: no filter
is used)
high cut filter will begin to
take effect (THRU: no filter
is used)
V-SYNTH_XT_e2 190 ページ ２００５年３月２３日 水曜日 午後４時３９分