Brady BP-IP300 用户指南

下载
页码 75
Basic Troubleshooting Guide
64
Invalid setup
The Setup menu is 
incorrectly configured.
Cancel the current job. Recheck 
all configuration settings.
Memory overflow
Handshake mode is not 
on.
Access the printer 
setup
 menu, 
handshake
 mode and select 
RTS/CTS
.
Multiple Label 
Tags Found, 
Remove Extras
Multiple tags on core of 
material or printer did not 
clear from last tag read.
Reboot printer to get a fresh read 
of supply, if error reoccurs select 
Enter to bypass and use Standard 
mode.
Multiple Ribbon 
Tags Found, 
Remove Extras
Multiple tags on core of 
material or printer did not 
clear from last tag read.
Reboot printer to get a fresh read 
of supply, if error reoccurs select 
Enter to bypass and the printer will 
load primary ribbon settings for 
Hassle Free mode.
Multiple Tags 
Read Remove 
Extra Tags
Label tags read 
incorrectly.
Remove and reinstall the label 
spool and/or the ribbon spool. If 
the error does not clear, recycle 
power to the printer.
Network Error, 
No Link
Ethernet is selected in the 
setup menu but no 
Ethernet connection.
• Check that the Ethernet server 
is available and connected, 
then recycle power to the 
printer.
or
• Go to the 
settings
 menu 
and turn off Network Error 
reporting, then recycle power to 
the printer.
No Label 
Detected
Missing RFID Tag
Select Enter to bypass error and 
used in Standard mode.
No label size
The size of the label is not 
defined in the software.
Check the software programming.
Error messages
Cause
Remedy