Enterasys csx5500 快速安装指南
B
ASICS
I
NSTALLING
H
ARDWARE
There is a possibility that your distributor has already completed hardware installation. If
hardware installation has not been completed, follow the instructions listed below.
hardware installation has not been completed, follow the instructions listed below.
WARNING:
Anytime you remove the module cover, make sure the power cord is not plugged in.
Failure to do so may result in personal injury or equipment damage.
Failure to do so may result in personal injury or equipment damage.
1.
Remove module cover.
2.
Install adapters.
3.
Attach LCD Cable to WAN adapter.
4.
Install needed inter-board cables (for TDM and/or MVIP connections).
5.
Replace module cover.
I
NSTALLING
S
OFTWARE
1.
Insert system software diskette # 1 into diskette drive and power on the machine.
2.
Type the following command at the DOS prompt:
install
<return>
3.
If you wish to review the Release Notes answer “y” to the prompt. Use <page down> and
<page up> to view sections of the Release Notes. At anytime you may press the <Esc> key to
continue with the installation.
<page up> to view sections of the Release Notes. At anytime you may press the <Esc> key to
continue with the installation.
4.
Follow the on-screen instructions to complete the software installation.
A
CCESSING
THE
R
ELEASE
N
OTES
The Release Notes provide release highlights and important information related to this release that
should be reviewed before you begin the system’s installation and configuration.
should be reviewed before you begin the system’s installation and configuration.
An abbreviated set of these notes are in a file called REL_NOTE.TXT. To display them on the
system, enter the following command at the system prompt:
system, enter the following command at the system prompt:
[product name]> LIST REL_NOTE.TXT
Or, you may access the complete set of notes via your Web browser:
http://www.cabletron.com/support/relnotes