Enterasys csx5500 快速安装指南
QUICK START
10 CyberSWITCH
2.
Install the Manager software onto the administration console PC. This step is OPTIONAL,
since it requires the administration console PC to have a hard disk with 1 MB of free space. You
can execute the Manager software from the diskette; however, running this software from the
hard disk is more efficient.
since it requires the administration console PC to have a hard disk with 1 MB of free space. You
can execute the Manager software from the diskette; however, running this software from the
hard disk is more efficient.
Insert the Manager software diskette into the diskette drive on the administration console PC
and enter the following command, replacing “diskette drive letter” with the appropriate
administration console PC drive (for example “A”). Type:
and enter the following command, replacing “diskette drive letter” with the appropriate
administration console PC drive (for example “A”). Type:
install<return>
When the DOS prompt reappears, the software installation on the administration console is
complete.
complete.
The Carbon Copy software on the Manager diskette is delivered with the following default
settings:
settings:
Comm Port Address
COM1
Baud Rate
9600
Modem Type
Direct Connect
If you want to attach remotely to the system using modems, you must change these settings by
using the CCINSTAL program. Refer to the Remote Management chapter of the User’s Guide for
details on running this program.
using the CCINSTAL program. Refer to the Remote Management chapter of the User’s Guide for
details on running this program.
L
OGIN
ON
THE
C
YBER
SWITCH
Once you have a connection to the CyberSWITCH, you will be presented with a prompt to enter
your log in id. Use admin as the login id. You will then be prompted for a new password, so choose
a password that you will remember. If your software was previously accessed by your distributor,
your password will be admin (in lower case).
your log in id. Use admin as the login id. You will then be prompted for a new password, so choose
a password that you will remember. If your software was previously accessed by your distributor,
your password will be admin (in lower case).
After you have logged in, you many enter any command at the system prompt.
M
AKING
C
ONFIGURATION
C
HANGES
We provide the following configuration tools to set up and/or alter your configuration:
•
•
CFGEDIT, the full configuration utility
•
Manage Mode, the dynamic management utility
The CyberSWITCH is configured using the configuration editor, CFGEDIT. To begin the
configuration process:
configuration process:
Start up the configuration editor, CFGEDIT. Your machine should be at the system prompt. To start
up the configuration editor simply type:
up the configuration editor simply type:
[system name]>
cfgedit
for the configuration
steps required for the device you wish to connect.