Enterasys csx5500 用户指南

USER’S GUIDE

622      CyberSWITCH

tftp session

Displays the TFTP session information of active TFTP sessions. To get detailed information on 
a specific session, enter the session’s Id number when prompted. You can not display the 
session information for a TFTP session that has terminated. The following screen illustrates the 
use of this command.

tftp stats

Displays the current TFTP related statistics. Refer to 

, for a list of available 

statistics and their definitions. 

T

RACE

 C

OMMANDS

Note:

For an explanation regarding the output resulting from the family of trace commands, refer 

to the 

 chapter.

The following commands are used to enable and disable trace reporting information:

> TFTP PUT

>IP Address of the Host to receive the file
(<RET> to abort)? 19.233.45.33

>Enter the name of the local file to send (including the full path)
(<RET> to abort)? \config\config.nei

>Enter the name for the remote file (including the full path)
(<RET> for same as local)? <RET>

Enter the mode (BIN [binary] or ASC [ascii])
<RET> for ascii? bin

Sending File... Please wait
File Transfer Complete...

> TFTP SESSION

Id Sess-Id Local file    Type/Mode   Bytes Xmit Retries
----------------------------------------------------------
 1        5 temp.txt      Client/Put       12752        1
 2        6 tmp           Server/Get         423        0
 3        7 text.txt      Server/Put        8481        0

Select the ID of the TFTP Session to display or <RET> to cancel? 2

TFTP Session ID:     6
Type:                Server
Mode:                Get 
Local Address:       190.5.6.8   (UDP Port: 5001)
Local File:          c:\tmp
Remote Address:      190.5.6.11 (UDP Port: 5011)
Remote File:         N/A
Transfer Mode:       netascii
Bytes Transferred:   935
Bytes Remaining:     1145723
Total Retries:       0