Enterasys csx5500 用户指南
Central Site Remote Access Switch 623
S
YSTEM
C
OMMANDS
UDP Commands
trace ipxwan [on/off]
Enables or disables the IPXWAN tracing option, which tracks all packets which are received or
sent out using IPXWAN protocol, and places this information in the system log. To display the
log file, issue the
sent out using IPXWAN protocol, and places this information in the system log. To display the
log file, issue the
dr
command. This option is initially disabled.
trace lapb [on/off]
Enables or disables the LAPB data link information packet tracing option. This feature displays
up to 15 octets of the packet. To display the log file, issue the
up to 15 octets of the packet. To display the log file, issue the
dr
console command. This option
is initially disabled.
trace [on/off]
Enable or disables the call trace information reports. If enabled, you can then view the logged
call trace information by issuing the
call trace information by issuing the
dr
command. For details on call trace messages, refer to
.
trace ppp [on/off]
Enables or disables the tracing of incoming and outgoing PPP packets. If enabled, you can view
the trace PPP information by issuing the
the trace PPP information by issuing the
dr
command.
trace x25 [on/off]
Enables or disables the X.25 packet tracing option. This feature displays up to 15 octets of the
packet. To display the log file, issue the
packet. To display the log file, issue the
dr
console command. This option is initially disabled.
wan fr-ietf trace [on/off] [in/out] [device/fr_accessname_dlci] [prot]
Enables or disables the tracing of incoming and out going frame relay IETF packets. This
feature displays the direction of the packet, the device or PVC name, the line protocol, and up
to 15 octets of the packet. To display the log file, issue the
feature displays the direction of the packet, the device or PVC name, the line protocol, and up
to 15 octets of the packet. To display the log file, issue the
dr
console command. This option is
initially disabled.
UDP C
OMMANDS
UDP (User Datagram Protocol) provides a datagram mode of communication for delivery of
packets to a remote or on-node device. When the system’s IP operating mode is enabled, the
following UDP commands are available:
packets to a remote or on-node device. When the system’s IP operating mode is enabled, the
following UDP commands are available:
udp conns
Displays the current UDP connection status.
udp stats
Displays the current system UDP statistics. Refer to
for definitions.
U
SER
L
EVEL
S
ECURITY
C
OMMANDS
The following console commands are available to provide information on the authentication
servers for user level security. They may be used to diagnose the following problems with:
•
servers for user level security. They may be used to diagnose the following problems with:
•
connections to an off-node authentication server
•
CyberSWITCH configuration
•
authentication server user database entries