Enterasys rbt-8100 安装指导

Wireless Switch Configuration Tasks

RBT-8100 Wireless Switch Installation Guide 3-3

(Each switch has a unique system name that contains the model number and the last half of 
the switch’s MAC address.)

3.

Access the enabled level (the configuration level) of the CLI:

RBT-8100-aabbcc> enable

4.

Press Enter at the Enter password prompt.

5.

Type quickstart. The command asks you a series of questions. You can type ? for more help. 
To quit, press Ctrl+C. The following example code accepts the defaults for system name and 
country code, and does not configure SSIDs, user information, or distributed access points.

Username: admin
Password:

RBT-8100-111400> enable

Enter password:

RBT-8100-111400# quickstart
This will erase any existing config. Continue? [n]: y
Answer the following questions. Enter '?' for help. ^C to break out
System Name [RBT-8100]:
Country Code [US]:
System IP address []: 182.29.1.250
System IP address netmask []: 255.255.255.0
Default route []: 182.29.1.1
Admin username [admin]:
Admin password []: admin
Do you wish to set the time? [y]: y
Enter the date (dd/mm/yy) []: 22/05/05
Enter the time (hh:mm:ss) []: 10:03:01
Enter the timezone []: EST
Enter the offset from GMT for 'EST' in hh:mm [0:0]: -5:00
Do you wish to configure wireless? [y]: n
success: created keypair for ssh
success: created keypair for admin
success: created self-signed certificate for admin
success: remember to save this config
RBT-8100#

6.

Optionally, enable Telnet. 

RBT-8100# set ip telnet server enable

7.

Verify the configuration changes.

RBT-8100# show config

8.

Save the configuration changes.

RBT-8100# save config

You can use RASM running in your corporate network to configure distributed RoamAbout 
wireless switches. You can stage any model of wireless switch by preconfiguring IP connectivity 
and enabling auto‐config, then sending the switch to the remote office. The switch contacts RASM 
in the corporate network to complete its configuration.