Seiko Instruments slp120 用户指南
Chapter 2
Getting Started
2-8
Smart Label Printer Models 220 and 120
3 Remove the spindle from the SLP and insert the label roll
on the spindle.
4 Insert the labels and spindle into the SLP. If using an SLP
220, adjust the guides to fit the labels as shown below.
5 Insert the free end of the label roll, label side down, into
the slot on the back of the printer. Push the label stock
into the slot until you feel a slight resistance. Continue
pushing gently. The SLP automatically feeds the labels
through and aligns the end in the exit slot.
into the slot until you feel a slight resistance. Continue
pushing gently. The SLP automatically feeds the labels
through and aligns the end in the exit slot.
If the label end doesn’t appear through the slot, press
and release the form feed button to advance the labels.
and release the form feed button to advance the labels.
SLP 220
SLP 120
slp120-2.bk Page 8 Friday, March 3, 2000 12:40 PM