Lenovo E75 用户指南

 
Power Source: 
 
1. Make sure the power cord is the correct type that is required in your area. 
2. This monitor has a universal power supply that allows operation in100/120V ac or 
220/240V ac voltage (No user adjustment is required) 
3.    Connect the power cord into your monitor’s power input socket, and then plug the other 
end into a 3-pin ac power outlet. The power cord can be connected to either a wall power 
outlet or the power outlet socket on your computer, depending on the type of power cord 
supplied with your monitor. 
 

For safe operation, use the power cord supplied with the unit. 

Connecting the video cable: The monitor comes with a built-in video cable. Plug the signal 
cable's 15-pin connector into the computer's video port and tighten the two screws on the 
cable connector. ( see figure 2) 
 
Connecting the power cord: Plug the power cord into the monitor's ac power socket. Then 
plug the power cord into a grounded ac outlet or UL-approved power strip or the power output 
socket on your computer. 
Caution: If the AC outlet is not grounded (only two holes), install the proper grounding adapter (not 
supplied) 
 
 

1

2

 

 

Figure 2   Connecting cables 
 

1. 

Power Cord 

2.

Signal Cable 

 
 
 
 
 

 

9