Lenovo E75 用户指南
Notes
. • Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place
subject to direct sunlight , or excessive dust or mechanical vibration or shock.
. • Save the original shipping carton and packing materials, as they will come in handy if you ever have
to ship your monitor.
. • For maximum protection, repackage your monitor as it was originally packed at the factory.
. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains can be
. • To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains can be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
Front control locations and functions
Operation
(1)
Switching the monitor on/off ( ):
The ON/OFF switch is used for switching the monitor on and
off. The ON/OFF switch does not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, please remove the power plug from the socket.
(2) Power indicator: This indicator lights up green when the monitor operates normally. If the monitor is
in Energy saving mode, this indicator color changes to flash
.
(3)
To adjust visual settings ( “ ”, “ ”, “ ”, “ ” ): Please following the procedure of
selection and adjusting an item using the OSD system as below steps for main functions adjustment.
Step 1: Press and release control key to activate the OSD menu.
Step 2: Press
or
key to highlight the desired option of OSD icon.
Step 3: Press and release key to access the option. The color of the inner area of the OSD will
changed from blue to green.
Step 4: To make your adjustments, press
key to increase or
key to decrease the setting.
Step 5: Press and release key to store the changed, the color of the inner area will go back to blue. You
can select other function to make adjustments by
and
key. Also you can select
EXIT icon or press key to exit the OSD menu.
Step 6: Additional adjustment function for contrast and brightness when press
or key
directly.
11
/
/
/
/
/
/
/
/
/
/