Lenovo E75 用户指南

OSD ADJUSTMENT:

You can choose where you would like OSD image to appear on your screen.

H. POSITION:

Moves the OSD image horizontally.

V. POSITION:

Moves the OSD image vertically.

TIMER (SEC.):You can select how long the monitor waits after the last adjust of the knob to

shut off the OSD menu. The time setting choices are from 8 to 60 seconds.

RESET:

Reset all settings and back to the factory defaults. If the monitor is operating in a user mode, this

control has no effect.

LANGUAGE:

Activates the LANGUAGE submenu. Allow you to choose the language for the menu screens.

seven languages can be chosen; English, German, French, Spanish, Portuguese, Simplified Chinese,

Russian.

EXIT:

Exits the OSD controls. (Turning off the OSD windows)

DEGAUSS:

Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron
beams and affect the purity of the screen colors focus and convergence. When pressed, your
image will jump and waver a bit as the screen is demagnetized.

Self test pattern

The monitor may display a three colors test pattern. This is to indicate that the monitor is functioning

properly, but the computer’s video signal is not reaching the monitor. In this case, please make sure

the video cable is properly connected. The test pattern will disappear when the monitor is able to

receive the video signal. However, if the test pattern does not display all three colors (blue, green and

red), the monitor is not functioning properly. Please contact your local dealer for assistance.

Safety protection

The safety protection function is protecting for the monitor itself. When frequency of video signal from

computer’s was out of range (please refer to monitor “specifications”). The monitor will protect by

itself and a warning message of OSD will appear on the screen, warning you to resetting monitor type

on your computer.

Timing guide

This multi-scanning monitor can automatically detect and display several video modes. If the monitor

recognizes one of preset timing signals, it will reset that mode and any stored display adjustments you

have made.