Axis M3203 用户手册

1. When accessing the camera for the first time, the 

‘

Configure Root Password’ dialog appears.

2. Enter a password and re-enter to confirm. Click 

OK.

3. The ‘

Enter Network Password’ dialog appears. Enter 

the User name: 

4. Enter the password set in step 2, and click 

OK. If the 

password is lost, the camera must be reset to the 
factory default settings. See page 35.

• The default administrator user name ‘

root’ is permanent 

and cannot be deleted.

• While setting the root password, click Yes to install the 

AXIS Media Control (AMC), if you are prompted to. You 
will need administrator rights on the computer to do 
this.

Once connected, the camera is accessible on your local network (LAN). To access the camera from the Internet you must 
configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature, 
which will attempt to automatically configure the router to allow access to the camera. This is enabled from 

Options > Network > TCP/IP Advanced.

For more information, please see NAT traversal (port mapping) for IPv4, on page 30. See also the AXIS Internet Dynamic DNS 
Service at www.axiscam.net For technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup