ATTO Technology diamond array v 用户手册
18
SNMP
SNMP, or Simple Network Management
Protocol, is an application layer protocol that
allows network devices to exchange management
information. Through a combination of standard
and custom MIBs (Management Information
Base), the array provides status and error
SNMP, or Simple Network Management
Protocol, is an application layer protocol that
allows network devices to exchange management
information. Through a combination of standard
and custom MIBs (Management Information
Base), the array provides status and error
indications to an SNMP server, allowing the array
to be managed with other devices in a complex
system through a common interface.
to be managed with other devices in a complex
system through a common interface.
Use CLI commands to configure up to six unique
Trap addresses. A trap is a way for the array to tell
the SNMP server that something has happened.
Trap addresses. A trap is a way for the array to tell
the SNMP server that something has happened.
Exhibit 4.0-1 The POST information displays after boot of the Diamond Storage Array.
Diamond Storage Array
(c) 2004 ATTO Technology, Incorporated.
Firmware version 5.40 release date Mar 30 2004, 10:43:06 Build 021G
Power-On Self-Test Completion Status: GOOD
128 Megabytes of RAM Installed.
Interface Port 0 is not installed.
Interface Port 1 is 1.0624 Gb/s Fibre Channel.
Interface 0 World Wide Name = 20 00 00 10 86 10 02 DC
Interface 1 World Wide Name = 20 00 00 10 86 10 02 DC
Diamond Array Serial Number = "MIDP100197"
Diamond Array Name = " "
System Serial Number = ""
Active Configuration = ATTO
DiamondClass = (V)86
Internal Temperature = 23 C [5 - 47]
ErrorLog Contents: NO ERRORS
For help, type HELP.
Ready.