Yamaha RX-Z9 用户指南

You can confirm the results of each analysis.

The results are displayed after all items have been 
analysed.

• Press  n and select Setup to set the measured values.
• Press  k and select Retry to retry the auto setup procedure.
• Press  h and select Detail to view information about 

measurement results and error or warning messages. For 
more details about error and warning messages, see 
“Troubleshooting  for the auto setup procedure” on 
page 37.

• Press l and select Exit to cancel the auto setup procedure.

The results are displayed individually after each analysis.

• Press n and select Next to start measurement of the next 

menu item.

• Press k and select Retry to measure the current item again.
• Press h and select Detail to view information about 

measurement results and error or warning messages. For 
more details about error and warning messages, see 
“Troubleshooting for the au to setup procedure” on 
page 37.

• Press l and select Exit to cancel the auto setup procedure.

After all menu items have been measured, “Measurement 
Over” appears on the screen and the results for each item 
are displayed.

• Press n and select Setup to set the measured values.
• Press k and select Retry to retry the auto setup procedure.
• Press h and select Detail to view information about 

measurement results and error or warning messages. For 
more details about error and warning messages, see 
“Troubleshooting for the au to setup procedure” on 
page 37.

• Press l and select Exit to cancel the auto setup procedure.

y

If you want to make more detailed settings, change the system 
parameters using the Manual Setup menu. If you want to return to 
the Auto Setup settings after making settings in the Manual Setup 
menu, navigate to the Information screen in the Auto Setup menu, 
press k/n repeatedly to select the parameter you want to adjust, 
then press ENTER.

• If you change speakers, speaker positions, or the layout of your 

listening environment, perform auto setup again to re-calibrate 
your system.

• In the Distance results, the distance displayed may be longer 

than the actual distance depending on the characteristics of your 
subwoofer. This may also be the case when using an external 
amplifier.

• In the Equalizing results, different values may be set for the 

same band to provide finer adjustments.

00EN.00_RXZ9_U.book  Page 36  Friday, October 17, 2003  11:40 AM