Yamaha RX-Z9 用户指南
38
AUTO SETUP
After auto setup
The following warning messages are displayed after analysis is complete to inform you of possible problems. We
recommend that you check the contents of each message, then select Retry to try the auto setup procedure again.
recommend that you check the contents of each message, then select Retry to try the auto setup procedure again.
Warning message
Cause
Remedy
W1:Out of Phase
Speaker polarity is incorrect. This message may
appear depending on the speakers even when
they are connected correctly.
appear depending on the speakers even when
they are connected correctly.
• Check the speaker connections.
W2:Over24m/80ft
The distance between the speaker and the
listening position is over 24 m (80 ft).
listening position is over 24 m (80 ft).
• Bring the speaker closer to the listening position.
W3:Level Error
The difference in volume level between the
speakers is excessive. (No level correction is
made.)
speakers is excessive. (No level correction is
made.)
• Readjust the speaker installation.
• Check the speaker connections.
• Use speakers of similar quality.
• Adjust the output volume of the subwoofer.
• Check the speaker connections.
• Use speakers of similar quality.
• Adjust the output volume of the subwoofer.
00EN.00_RXZ9_U.book Page 38 Friday, October 17, 2003 11:40 AM