Zhone 5100 参考手册
Network Timing Protocol
Vpacket 5100/6100 Series Reference Manual
129
Setting the NTP interval
You can set the NTP polling interval by issuing the set ntp interval command.
Syntax: set ntp interval <1-255>
Syntax: set ntp interval <1-255>
1-255
hours between polling; default = 24
Example:
In this example, the 5100/6100 VDR resynchronizes with the NTP server every 12 hours.
Viewing NTP information
You can view the currently configured NTP settings by issuing the show ntp command.
Syntax: show ntp
Displays the current Network Timing Protocol (NTP) configurations.
Example:
Syntax: show ntp
Displays the current Network Timing Protocol (NTP) configurations.
Example:
In this example, the NTP configuration is shown. The IP address of the NTP server is
172.16.32.21, the time zone is -7 hours from UCT, and the 5100/6100 VDR resynchronizes with
the NTP server every 12 hours.
Vpacket# set ntp interval 12
Vpacket#
VPacket# show ntp
NTP Server Address : 172.16.32.21
Timezone (+/-12 from UCT) : -7
Interval for resynchronization (hours) : 12