Zhone 5100 用户指南

CHAPTER 4
Settings options

From this window you can set and view the current settings for the MGCP end points. Each 

telephony channel on the system is an MGCP end point. The configurable MGCP end point 

parameters include:
•

Index number A unique, sequentially numbered identifier for this terminal

•

Terminal Name A human-readable name.

•

Digit Map Using the North American Dialing Plan, this field lets you set a up a digital 
mapping configuration similar to the use of the CLI command set tcid [tcid] 
default_digit_map <digit_map_string> where [0-9]xxx: the bracketed numbers supply a set 
of valid numbers–separated by commas–which precede the local dialing number.; 91x.T: 
these parameters allow for a PBX dial-out both locally and across area codes (the x and the 1, 
respectively); the “.T” signifies a duration in seconds during which the digits must be dialed or 
a fast busy signal occurs; and 9011x.T: these parameters allow for a PBX dial-out for 
international calls.

•

Mode Operational mode of the terminal. Can be dynamic or static.

•

MGC Index Sequential numbered value for this session.