Zhone 5100 安装指南

CHAPTER 2
Installation

    

9. Attach the captive grounding nut to a protective earthing terminal which has a permanent 

connection to building earth.

10. To power on the unit, see “Connecting to a PC and powering the VDR” on page 29.

You have successfully attached the VDR unit to the wall. 

To rack-mount the 5100/6100 VDR in an industry-standard 19-inch rack, you need an electronic 

enclosure rack that meets the following specifications:
•

Heavy-duty aluminum or steel construction

•

Electronic Industries Association (EIA) standard hole-spacing

•

Width of 19 inches (48.26 cm) and depth of 24 inches (60.96 cm)

•

If the rack rails do not have threaded holes, you must supply cagenuts to use with the cagenut 
screws. For rack mounting the 5100/6100 VDR, use screws that are appropriate for your 
rack.

The next two procedures explain how to install the 5100/6100 VDR flush in a rack or with a 3-

inch offset.
When mounting a 5100/6100 VDR in a 19-inch rack, you should ensure that the rack is not 

overloaded or unevenly loaded.

1. Use the supplied screws to attach the mounting brackets to the 5100/6100 VDR. See 

Caution. Use of longer screws could result in damage of internal components. 

!