Zhone 5216 安装指导
4
Product-Related Documents
To install a POTS splitter, refer to the appropriate POTS splitter document:
Document Number
Document Title
5030-A2-GN10
Hotwire 5030 POTS Splitter Customer Premises
Installation Instructions
Installation Instructions
5038-A2-GN10
Hotwire 5038 Distributed POTS Splitter Customer
Premises Installation Instructions
Premises Installation Instructions
Contact your sales or service representative to order additional product documentation.
Paradyne documents are available on the World Wide Web at www.paradyne.com.
Select
Select
Library
→
Technical Manuals
→
Hotwire DSL & MVL Systems.
Package Checklist
Verify that your package contains the following:
Model 5216 Remote Termination Unit (RTU)
DSL interface cable with RJ11 modular plugs
Power cord with power transformer
Wiring and Cables You Need
The following wiring and standard connectors are used with this product:
Standard RJ11 wall jack for the DSL cabling.
DSL cabling: New or existing unshielded twisted-pair wiring (CAT3 or better). The
CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
Ethernet cabling: Standard Ethernet crossover cable with an 8-pin, non-keyed
modular plug for a PC or workstation. Refer to
modular plug for a PC or workstation. Refer to
Installing the Hotwire 5216 RTU on
page 8 for Ethernet cable details.
Refer to
Cables & Connectors on page 12 for standard pin numbers.