Zhone 6301 安装指导
12
Power-On
When power is applied, the router performs self-diagnostics and the PWR LED is on.
The self-diagnostics include a power-on self-test. During the power-on self-test, all of
the LEDs turn on for one second.
The self-diagnostics include a power-on self-test. During the power-on self-test, all of
the LEDs turn on for one second.
Status LEDs
After a successful self-test, the LEDs should appear as indicated in BOLD in the
Condition column below. Refer to
Condition column below. Refer to
on page 13 for LED indications
requiring action.
LED
Condition
Status
PWR
ON
The router has power.
ALM
Blinking
ON
OFF
A firmware download is in progress. The TST LED is also
on during a download.
on during a download.
An alarm condition exists.
No alarms have been detected by the router.
TST
ON
OFF
The TST LED is on during the power-on self-test, during a
test initiated by the service provider, and during a firmware
download.
test initiated by the service provider, and during a firmware
download.
No tests are active.
LINE
ON
OFF
The DSL link is active and ready to transmit and receive
data.
data.
No DSL link has been established.
TX/RX
ON
OFF
Data transmission is in progress on the DSL line.
No data is being transmitted or received by the router.
ETHERNET
ON
OFF
The Ethernet connection is active.
No Ethernet device is detected.
01-16932
Hotwire 6351
ReachDSL
Router
ReachDSL
Router
TST
LINE
ETHERNET
ALM
PWR
Power – green
Alarm – red
Test – yellow
Transmit/Receive – green
Ethernet Link – green
TX/RX
DSL Line – green
ReachDSL
6351
R
R