Zhone 6210 安装指导
4
Installing the Hotwire ADSL/R Bridge/Router
Place the router on a flat surface with clearance for the rear connectors.
Procedure
1.
UNPLUG TELEPHONE. If a telephone is connected at
the RJ11 wall jack where the router will be installed,
unplug the telephone cable from the wall jack.
the RJ11 wall jack where the router will be installed,
unplug the telephone cable from the wall jack.
2.
RECONNECT TELEPHONE.
(Optional. Go to
(Optional. Go to
if you are not
connecting a telephone to the router.)
Plug the existing telephone cable that was
unplugged in
unplugged in
into the jack labeled
PHONE. The router has a built-in filter, so
no filter is required on this phone.
no filter is required on this phone.
3.
CONNECT DSL LINE. Use the supplied
RJ11 telephone cable for the ADSL/R line
connection. Insert one end of the cable into
the jack labeled LINE. Insert the other end
of the cable into the RJ11 wall jack.
RJ11 telephone cable for the ADSL/R line
connection. Insert one end of the cable into
the jack labeled LINE. Insert the other end
of the cable into the RJ11 wall jack.
RJ11
Wall Jack
PHONE L
INE
ETHERNET
POWER
PHONE
RJ11
Wall
Jack
PHONE LINE
RJ11
6-pin
Interface
Cable
LINE
02-17358