ZyXEL p-660hwp 用户手册
P-660HWP-Dx Quick Start Guide
3
1 Open a browser such as Internet Explorer and go to your favorite website. Wait while
your P-660HWP-Dx tries to detect your DSL connection to your ISP. This may take a
few minutes.
few minutes.
2 After it detects the connection, the DSL light shows green on your device and the
Internet light comes on when the Internet is ready for you to use. If you have a PPPoE
connection, you will have to enter your user name and password.
connection, you will have to enter your user name and password.
3 Go to section 3 if you wish to configure your wireless settings using the wizard.
4 If you do not see the connection test screen, or the connection test is not successful,
4 If you do not see the connection test screen, or the connection test is not successful,
follow the instructions in the screen below, or check your connections and restart the P-
660HWP-Dx.
660HWP-Dx.
3 Internet and Wireless Setup Wizard
Use this wizard to connect to the Internet and configure your wireless settings
3.1 Log In to the Wizard
Default Login Information
1 Open a browser such as Internet Explorer and enter the following URL address: http://
192.168.1.1
2 Type the admin password 1234 (default). Click Login.
• If your browser does not display the login screen, see Troubleshooting for details.
3 Type (and retype) a new password and click Apply. It is strongly recommended that
you change the P-660HWP-Dx’s password and write it down.
You have to use a new password other than the default password 1234.
You have to use a new password other than the default password 1234.
IP address
http://192.168.1.1
administrator password
1234